 |
| Quantity: | |
|---|---|
Manufacturing process of thermal spraying guide roller
The manufacturing process of thermal spraying guide roller mainly includes the following steps:
1、 Surface preparation: First, thoroughly clean and pre-treat the guide roller to ensure that the surface is free of oil, rust or other impurities so that the coating can adhere well.
2、 Selection of spraying materials: According to the use requirements and working environment of the guide roller, select suitable spraying materials, such as tungsten carbide, nickel-based alloy, etc.
3、 Thermal spraying process: Use thermal spraying equipment to heat the selected material to a molten state or a high plastic state, and then atomize and spray it onto the surface of the guide roller at high speed under the impetus of external gas or flame flow. The particles of the coating material collide with the substrate, deform, flatten and solidify rapidly to form a coating.
4、Coating cooling and solidification: The coating cools and solidifies on the surface of the substrate to form a solid protective layer.
5、 Post-processing: After the coating is solidified, subsequent treatments such as grinding and polishing may be required to achieve the required surface roughness and flatness.
6、Quality inspection: Finally, the guide roller is quality inspected to ensure that the thickness, hardness, wear resistance, etc. of the coating meet the technical requirements.
Besides, we also provide High Hardness Industry Roller for Cooling Table, Excellent Quality Industry Roller for Steel Mills, Automatic Industry Roller for Rolling Factories and Mechanical Industry Roller for Steelmaking Factories。
Manufacturing process of thermal spraying guide roller
The manufacturing process of thermal spraying guide roller mainly includes the following steps:
1、 Surface preparation: First, thoroughly clean and pre-treat the guide roller to ensure that the surface is free of oil, rust or other impurities so that the coating can adhere well.
2、 Selection of spraying materials: According to the use requirements and working environment of the guide roller, select suitable spraying materials, such as tungsten carbide, nickel-based alloy, etc.
3、 Thermal spraying process: Use thermal spraying equipment to heat the selected material to a molten state or a high plastic state, and then atomize and spray it onto the surface of the guide roller at high speed under the impetus of external gas or flame flow. The particles of the coating material collide with the substrate, deform, flatten and solidify rapidly to form a coating.
4、Coating cooling and solidification: The coating cools and solidifies on the surface of the substrate to form a solid protective layer.
5、 Post-processing: After the coating is solidified, subsequent treatments such as grinding and polishing may be required to achieve the required surface roughness and flatness.
6、Quality inspection: Finally, the guide roller is quality inspected to ensure that the thickness, hardness, wear resistance, etc. of the coating meet the technical requirements.
Besides, we also provide High Hardness Industry Roller for Cooling Table, Excellent Quality Industry Roller for Steel Mills, Automatic Industry Roller for Rolling Factories and Mechanical Industry Roller for Steelmaking Factories。
