 |
| Quantity: | |
|---|---|
Product Introduction:
The wrinkle scraper is a tool specially used in the papermaking industry. Its main function is to peel the paper sheet from the surface of the dryer and apply appropriate pressure on the contact paper surface while peeling, so that the surface of the paper sheet forms wrinkles. structure. This process is particularly important for the production of household paper products such as toilet paper and paper towels, because it is directly related to product quality and production efficiency.
Product Advantage:
Tianmeng Company found in long-term research that spraying ceramic coating on the blade edge is an important method to optimize the performance of the scraper. Spray ceramic coating on the edge of the steel scraper that has been pre-treated by thermal spraying, and then apply it on the scraper blade. The performance of the scraper after grinding and processing by thermal spraying technology is greatly improved, which can give the surface of the substrate a high degree of wear resistance and heat resistance. This improvement in performance is consistent with the usage conditions of the scraper, so it can effectively Extend the life of the scraper.
Technical Parameters:
| Support customization | yes |
| Knife edge angle | 0-90°adjustable |
| Straightness | Less than 0.005mm/m |
| Balance | No greater than 0.005mm/m |
| Roughness | Ra0.2-0.01 |
| Flexibility | Excellent |
| Wear resistance | 50-70 times that of zirconium stainless steel |
| Models range | From 0.381*76.2*L, can be customized |
| Brand | Tanmng |
| Applicable machinery | Paper making machinery |
| Blade type | Paper industry blade |
| Coating | Ceramic |
| Purpose | Wrinkling |
Product Uses:
As an important consumable component in the production of household paper, ceramic creping scrapers have a direct impact on product quality and production efficiency. The function of ceramic creping scrapers is to peel paper sheets from the surface of the dryer and at the same time, damage the paper surface in contact with them. Apply appropriate pressure to form a wrinkle-like structure on the surface of the paper. This requires that the wrinkling scraper should have good wear resistance, appropriate edge sharpness, a certain degree of elasticity in the blade body, and a contour shape that meets the wrinkling technical requirements.
FAQ:
The hardness of the ceramic coating is consistent with the hardness of the scraper base material. It does not increase the hardness to extend the life of the scraper. Excessive hardness will damage the blade and stick. The function of the coating is to reduce the friction between the blade and the blade, thus reducing the scraper life. Wear and tear. Another feature of ceramic coating is that it does not stick to foreign impurities, thus reducing wire drawing. What are the advantages of ceramic coating?
1. Professional technology, excellent quality, reasonable price, can completely replace imports
2. The wear resistance of the scraper is extended and super wear-resistant.
3. The scraper has good elasticity; used in high-speed machines with operating speeds higher than 180m/min.
4. It has good corrosion resistance, and its corrosion resistance is 60 times that of stainless steel! When used properly, it is 10 to 40 times that of ordinary high-speed steel.
5. The service life is extremely long, the scraping length can reach 300,000 to 500,000 meters, and the longest is 600,000 meters.
Product Introduction:
The wrinkle scraper is a tool specially used in the papermaking industry. Its main function is to peel the paper sheet from the surface of the dryer and apply appropriate pressure on the contact paper surface while peeling, so that the surface of the paper sheet forms wrinkles. structure. This process is particularly important for the production of household paper products such as toilet paper and paper towels, because it is directly related to product quality and production efficiency.
Product Advantage:
Tianmeng Company found in long-term research that spraying ceramic coating on the blade edge is an important method to optimize the performance of the scraper. Spray ceramic coating on the edge of the steel scraper that has been pre-treated by thermal spraying, and then apply it on the scraper blade. The performance of the scraper after grinding and processing by thermal spraying technology is greatly improved, which can give the surface of the substrate a high degree of wear resistance and heat resistance. This improvement in performance is consistent with the usage conditions of the scraper, so it can effectively Extend the life of the scraper.
Technical Parameters:
| Support customization | yes |
| Knife edge angle | 0-90°adjustable |
| Straightness | Less than 0.005mm/m |
| Balance | No greater than 0.005mm/m |
| Roughness | Ra0.2-0.01 |
| Flexibility | Excellent |
| Wear resistance | 50-70 times that of zirconium stainless steel |
| Models range | From 0.381*76.2*L, can be customized |
| Brand | Tanmng |
| Applicable machinery | Paper making machinery |
| Blade type | Paper industry blade |
| Coating | Ceramic |
| Purpose | Wrinkling |
Product Uses:
As an important consumable component in the production of household paper, ceramic creping scrapers have a direct impact on product quality and production efficiency. The function of ceramic creping scrapers is to peel paper sheets from the surface of the dryer and at the same time, damage the paper surface in contact with them. Apply appropriate pressure to form a wrinkle-like structure on the surface of the paper. This requires that the wrinkling scraper should have good wear resistance, appropriate edge sharpness, a certain degree of elasticity in the blade body, and a contour shape that meets the wrinkling technical requirements.
FAQ:
The hardness of the ceramic coating is consistent with the hardness of the scraper base material. It does not increase the hardness to extend the life of the scraper. Excessive hardness will damage the blade and stick. The function of the coating is to reduce the friction between the blade and the blade, thus reducing the scraper life. Wear and tear. Another feature of ceramic coating is that it does not stick to foreign impurities, thus reducing wire drawing. What are the advantages of ceramic coating?
1. Professional technology, excellent quality, reasonable price, can completely replace imports
2. The wear resistance of the scraper is extended and super wear-resistant.
3. The scraper has good elasticity; used in high-speed machines with operating speeds higher than 180m/min.
4. It has good corrosion resistance, and its corrosion resistance is 60 times that of stainless steel! When used properly, it is 10 to 40 times that of ordinary high-speed steel.
5. The service life is extremely long, the scraping length can reach 300,000 to 500,000 meters, and the longest is 600,000 meters.
